Cheng Food-Safe Concrete Countertop Sealer (500 mL)

Revised Content:

CHENG Concrete Countertop Sealer: A Food-Safe and Non-Toxic Solution

CHENG Concrete Countertop Sealer is a water-based, non-toxic concrete sealer designed for use on kitchen and bath concrete countertops. This hybrid concrete sealer protects without creating a "plastic-looking" finish, allowing the warm luster and beauty of your concrete to shine through.

Coverage: - 500 mL Bottle: Covers up to 30 sq ft - 4 L Bottle: Covers up to 240 sq ft

Key Features: - Food-Safe: CHENG Concrete Countertop Sealer is 100% food-safe and safe for use on kitchen countertops. - UV Resistant: Ideal for both interior and exterior use. - Zero VOCs: Environmentally friendly with no volatile organic compounds.

Applications: - Kitchen and Bath Concrete Countertops - Concrete Furniture

Application Instructions:

1. Choose the Right Environment:
2. Work indoors or in the shade, away from moving air and in a dust-free location.

3. Avoid conditions that may cause the sealer to dry too quickly, as this can lead to streaking.

4. Dilute the Sealer:

5. Dilute the sealer with tap water in a 30% sealer to 70% water ratio.

6. This makes the sealer easier to apply and reduces the risk of streaking.

7. Soak Concrete with Water:

8. Thoroughly rinse the concrete with clean water using a 100% cotton cloth.

9. If the concrete has been previously sealed and waxed, remove the wax with mineral spirits.

10. Apply the Sealer:

11. Apply the sealer dilution in thin, even coats, using a rag.
12. Work quickly and methodically, ensuring uniform coverage.

13. For "new" concrete, apply 3 to 6+ coats until the concrete no longer darkens when water is dripped on the surface.

14. Wipe up the Sealer:

15. Wipe up the excess sealer with the same rag, wringing it out into the sealer dilution.

16. The goal is to leave a thin, uniform layer of sealer on the surface, not to completely dry the countertop.

17. Perform a Water Drop Test:

18. After the sealer has dried overnight, test the surface by pouring water on it and letting it sit for 10 minutes.
19. If the surface darkens after wiping off the water, repeat steps 2-4 until the water-drop test is passed.
20. Once fully sealed, the surface can be burnished with diamond-infused hurricane pads to remove any streaks or adjust the sheen.

This revised content maintains the original meaning while enhancing the reading experience through improved sentence structure and organization. The word count remains within the 500-word limit.

product information: